Promise Technology VTrak J610S Handbuch PDF herunterladen (Seite 164)

VTrak E-Class Product Manual

146

available. However, the logical drive has lost redundancy (fault tolerance).

You must determine the cause of the problem and correct it.

• Rebuilding – This condition is temporary. When a physical drive has been

replaced, the logical drive automatically begins rebuilding in order to restore

redundancy (fault tolerance). When a logical drive is rebuilding, it will

function and your data is available. However, access will be slower due to

the rebuilding operation.

• Transport Ready – After you perform a successful Prepare for Transport

operation, this condition means you can remove the physical drives of this

disk array and move them to another enclosure or different drive slots. After

you relocate the physical drives, the disk array status will show OK.

Adjustable Items

• Alias – Optional.

• Media Patrol – Enabled is the default and recommended setting

• PDM – Enabled is the default and recommended setting

• Power Management – Enabled is the default and recommended setting

• Current Power Saving Level – Disable, Idle, Standby, or Stop

• User Set Power Saving Level – Disable, Idle, Standby, or Stop

See “Making Controller Settings” on page 122 and “Making Disk Array Settings”

on page 146.

Making Disk Array Settings

To make Disk Array settings:

1. Click the Subsystem icon in Tree View.

2. Click the Disk Arrays icon.

3. Click the Disk Array icon.

4. Click the Settings tab in Management View.

5. Optional. Enter an alias in the Disk Array Alias field.

Maximum of 32 characters. Use letters, numbers, space between words,

and underscore.

6. Check the following boxes to enable, uncheck to disable:

• Media Patrol

•PDM

• Power Management

7. Click the Submit button.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 439 440

Keine Kommentare

Promise Technology VTrak J610S Handbuch Seite 164