Promise Technology SuperTrack EX8658 Bedienungsanleitung PDF herunterladen (Seite 208)

SuperTrak EX Series User Manual

194

<Ld count> Specifies the number of logical drives to be created with

the -a add option. With the -c option, all the logical drives

have same settings but only one -l option=value can be

specified.

-t <condition type> Specifies the type of incomplete condition to accept. If not

specified, it will accept the current incomplete condition

by default.

missingdrive The condition of missing drive in the array.

missingwatermark The condition of missing NVRAM watermark of the array.

-v Verbose mode. Displays all array properties, requires -a list option.

Examples

array -v -c 1

array -a add -s "alias=MyArray,mediapatrol=enable" -p 1,3,5~9

-l "raid=5,capacity=50gb,stripe=256kb,sector=1kb"

array -a add -p 1,3,5~9 -l "raid=5,capacity=50gb,stripe=256kb"

-l "raid=0,capacity=100gb"

array -a mod -d 1 -s "alias=YourArray,mediapatrol=disable"

array -a del -d 3

array -a locate -d 0

array -a addld -d 0 -l "raid=1e,capacity=125gb,stripe=64kb"

array -a delld -l 1

battery

Usage

battery [-a <action>] [-b <batId>]

battery -a recondition -b <batId>

Summary

The battery command displays the status of a battery by the percentage of

charge left.

On subsystems, this command also reconditions the battery. Reconditioning fully

discharges then fully recharge the battery. The battery is reconditioned

automatically once per month.

Options

-a <action> Specifies the action to perform.

list (Default) List information for all batteries or a specific

battery.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 323 324

Keine Kommentare

Promise Technology SuperTrack EX8658 Bedienungsanleitung Seite 208