Promise Technology VessRAID 1000i Series Handbuch PDF herunterladen (Seite 99)

Chapter 4: Management with WebPAM PROe

Starting or Restarting Telnet service

To start or restart the Telnet service, click the Start or Restart button.

Making SNMP Settings

VessRAID’s SNMP service enables the SNMP browser to obtain information from

the VessRAID. The Trap Sink is where SNMP events are sent and can be

viewed.

To change the SNMP settings:

1. Click the Subsystem icon in Tree View.

2. Click the Administrative Tools icon.

3. Click the SNMP Management link in Management View.

4. Enter the SNMP Port number.

161 is the default.

5. Enter a System Name.

There is no default name.

6. Enter a System Location.

USA is the default.

7. Enter a System Contact (the email address of the administrator or other

individual).

8. Enter the Read Community.

Public is the default.

9. Enter the Write Community.

Private is the default.

To add a Trap Sink, see “Adding Trap Sinks” below.

10. Click OK in the confirmation box to restart the SNMP service with your

changes.

Adding Trap Sinks

To add a trap sink:

1. Enter a Trap Sink IP address.

2. Select a Trap Filter, choose the lowest level of Severity to be reported for

each event.

See “Setting-up User Event Subscriptions” on page 63 for an explanation of

the Severity levels.

3. Click the Update button.

The new trap sink appears in the Trap Sinks list.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 353 354

Keine Kommentare

Promise Technology VessRAID 1000i Series Handbuch Seite 99