Promise Technology FastTrak S150 Bedienungsanleitung PDF herunterladen (Seite 10)

FastTrak S150 TX2plus User Manual

Installing the FastTrak Card

The FastTrak TX2plus Serial ATA RAID card fits into any available PCI slot on

your PC’s motherboard (see Figure 1, below):

• 32-bit PCI slot (must be PCI 2.2 or 2.3 compliant)

• The 32-bit portion of a 64-bit PCI slot

1. Remove the cover of your system.

2. Remove the inside slot cover of an available 32-bit PCI slot on the

motherboard.

3. Install the FastTrak Serial ATA RAID card into the open slot (see Figure 1

below). Secure the bracket to the system’s frame.

4. Attach your system case’s 2- or 4-pin LED cable to the LED connector on

the FastTrak S150 TX2plus RAID card (see Figure 2, on page 8). Make

sure that pin 1 on the connector is aligned with pin 1 of the cable.

5. Fasten the controller card bracket to the system case (see below).

Figure 1. Insert the FastTrak card into an open PCI slot

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

Keine Kommentare

Promise Technology FastTrak S150 Bedienungsanleitung Seite 10